4, attention
1. Installation of energy-saving lights, no physical contact with any part of the lamp or lampholders charged; Take care not to force too much, so as not to damage shell lamps, lamp or lampholders; Not holding lamp, the lamp or causing injury to human injury.
2. The energy-saving lights installed on the lights when the tube should be fully exposed that the first induction tube lights, or lights reflecting tube may interfere with the normal induction lights and sensors in maloperation.
3. The energy-saving lamps for installation, spacing should be installed more than twice the height of the installation, adjacent to two light sensors regional overlap and interfere with each other and lead to misoperation.
4. The energy-saving lamps use infrared sensors, infrared detection of changes and as a means of control sensor lights activated. You may know that any objects infrared radiation, the wavelength is different. Although the sensor lights on the infrared receiver for the filtration, only human radiation sensors infrared wavelength range, but will inevitably arise in the region with the induction of human wavelength of the infrared radiation of the same object, such as body temperature and similar objects, or hot air. Therefore, they may also result in the mobile sensor lights in the absence of induction circumstances start. This is a normal phenomenon, please rest assured use.
5. You know, life has no products, such as energy-saving lights beyond the life and stop working, you will have to use the new lights to replace the old induction sensors lights. Do not attempt to repair their own demolition.
6. The sensor lights do not apply to the use of outdoor environment.
7. Because of the sensor lamps contain glass parts, the sensor lights placed on the children can not contact the location, so as to avoid inadvertently broken glass caused injuries of children.
